Easy Bohemian Valentine's DIY

Valentine's Day is just around the corner, do you have your gifts in order?

Usually I'm not one to celebrate Valentine's Day. I still don't plan on celebrating it with my boyfriend this year. But a couple of coworkers decided to do a "Secret Cupid" type of thing. Basically we drew names from a bottle and we're buying or making a gift for the chosen one.

When I get the chance to create something for someone else, it's rare that I won't be all in! 

Today I'm going to be showing you how to make this beyond easy, little candy stash jars out of mason jars. The cool part about these is when all of the candy is gone, you can put a little tea light candle in the bottom and the heart cut out illuminates. 

This project will cost you less than $15 and will be the perfect gift for any Valentine. 

Here's what you'll need:

Getting started:

Using your X-acto knife cut small hearts out of your tape. Duct tape is a little more difficult to work with so I ended up using blue painters tape for the smaller hearts.

The easiest way to do this is to place a large piece of tape directly onto your jar and cut the heart out while the tape is actually on the jar. Make sure that when you have your shapes cut out you really make sure the edges are secure and flat. You don't want any paint to seep through.

Paint the jar.

Gather your paints and start going to town. You will probably need about 5 coats depending on the opacity of your paint. I did about 3 layers of this red paint and then 2 coats of the glitter on top.

Don't worry about painting on the hearts. The tape is there to make sure your final shape is in tact.

Take off the stenciled heart.

Very carefully remove the tape hearts from your jar. You may want to use the X-acto knife to aid in the removal. If you try and just rip it straight off, your shapes may come out a little messy and jagged. 

I traced the outline of the heart with my X-acto knife before I even tried to remove the tape from the glass. That way I knew it would come off very clean.

If your shapes are a little jagged, you can go back in with your knife after and sharpen up the lines and edges. This project is pretty forgiving.

Fill 'em up.

Fill up your jars with the candy or other goodies that you decided to purchase. The dollar stores usually have all of the good candies for really cheap at this time of year!

Admire your work.

I decided to add a little twine to the top of my jars. I felt it added the perfect rustic feel that my jars were needing!

Not only was this project inexpensive, I know that the recipient will definitely love it. Both the jars and the crate can be used for numerous things after the treats are all gone. I was a little tempted to keep this one for myself, not going to lie!

This project is one of those that you honestly can't really screw up. It's completely customizable and is a simple way to tell someone that you care!

I hope you enjoyed this little project. If you did, make sure to subscribe below so you can be notified when I post new content!

Bohemian Wood Slice Clock

This week I come to you with a DIY for one of my new favorite decorative pieces in my apartment. I've never had an actual clock in my space so when I got the idea for this wood slice clock, I knew it was just what I needed.

The best part about this clock is that it is so easy. The most complicated part is drilling the hole to put the clock and battery pack in. Which if you know how to use a drill, or have a person in your life who does know how, this step should not be a problem at all.

This clock is so versatile and has infinite design options. You can customize it just the way you want it!

So let's get right into the tutorial!

You will need:

  • A wood slice - I chose a small piece but you can choose whichever size fits your space best. I got mine from Michael's for about $6. You can find one online here.
  • A clock set - I found mine at Michael's for around $9. Make sure you pay attention to how thick the wood slice is in comparison to the clock shaft, the packaging should tell you this information. The one I chose was a 5/8th of an inch thick clock set. BTW - Michael's always has 40% off coupons on their app so I used that to get this bit. If you don't have their app and aren't signed up for their email newsletter, you are missing out on some serious savings!
  • A dremel (or drill) - The clock set you purchase should tell you how thick of a drill bit you will need.
  • A paint pen or sharpie - This is optional but this step is where your creativity shines!

Just like with my last tutorial, I will put a very detailed description below with plenty of pictures. If you want to get straight to the nitty gritty, go ahead and scroll all the way to the bottom for a condensed version of the tutorial.


For the first step, you'll need to determine the center of your wood slice. If you're feelin' crazy and want to put your clock base off center, then do your thing! I wasn't sure my OCD would let me base it off center, so I stuck with the middle. Drill a hole where you want the base of the clock to sit. 

If you plan on decorating the entire wood slab, you can do this first step last. I knew going into this that I wanted very minimal design, so I was content with getting this part over with. 


Once you know your drilled hole is big enough for the clock base to fit, get your paint pens and let your creativity flow. I went for a henna/mandala style with a gold paint pen. Like I said, I wanted the bare minimum with my designs but you could definitely go wild and cover the whole wood piece. Even a solid color paint or chalkboard paint would look super cute with this clock.

My original plan was to get my wood burner and design a small 6 and 12 onto the clock. But I decided I like the lightness and simplicity of the finished piece after all. 


The third and final step (I told you this was easy) is to set up the clock hands and battery pack. The set I bought only takes one AA battery, score! This is where the importance of the length of the clock shaft comes into play.  You will not be able to get the hands on if the clock set you bought isn't thick enough. Mine had a little extra room, which I am totally okay with. Better to have extra room than not enough. 

Was that easy or what! Now that you have a custom, one-of-a-kind clock that you made with your own hands show it off to all your friends and family. These would also make excellent gifts considering the holidays are just around the corner!


Want a quick and condensed version of the tutorial? See the steps below.

  1. Drill a hole in the wood slice, making sure it is the size of the clock shaft you purchased.
  2. Double check to make sure the clock fits into place. 
  3. Let your creativity shine with your markers and paint. This is the fun part, so don't hold back! Just start doodling if you don't have a plan.
  4. Position the clock parts into your freshly decorated wood slice. 
  5. Put some batteries in and be so impressed by the awesomeness you created! Ahh.

If that's not simple, I don't know what is!

If you do make one of these, make sure you send me a picture. You can reach me at bohemiancrossroads@gmail.com.

Also, if you have enjoyed this tutorial and want to see more like it, I would love for you to subscribe below or in the NEWSLETTER tab above. I post twice weekly. Join me on Monday for a motivational quote and again on Friday for a fun project!